Chapter 2: Hardware Installation
2-5
Identifying the Cable Connectors
The following illustration identifies each of the cable connectors. Refer
to the sections following the illustration for specific instructions on
installing each peripheral. After installing the peripheral and LAN
cables, replace the cable cover and tighten the thumbscrew.
Audio Out
Speaker
Cash Drawer
Power
CRT
Keyboard
COM 1
PS/2
IRDA (not used)
LAN
Microphone
COM 2
(optional)
RS-232
USB 1
(COM 3 & 4)
Parallel
USB 2
19107
Note: COM1 and COM3 are powered ports.
Note: The COM3 & COM4 RS‐232 ports require the Dual RS‐232 Port
Kit (7454‐F072) feature