Completing The Os Installation (Win2000) - NCR 7454 Hardware User's Manual

16. Select which type of recovery you want to perform from the next
menu (normally option #1).
1) Redo entire disk with the first partition the same size.
2) Redo the first OS partition.
3) Redo the second OS partition.
The Ghost software then begins the disk recovery from the CD. It
displays a progress bar and gives you an estimate how long the
process should take.
When the recovery process is completed, the client hard disk is
restored to its preinstalled condition, as originally received from
the factory.
17. At the completion of the recovery process remove the CD and press
ENTER to reboot the terminal.
18. Remove the CD during reboot for the OS to begin. When system is
restored, reset the BIOS to normal defaults.

Completing the OS Installation (Win2000)

The system automatically reboots when the image recovery is complete
and starts the software installation. This installation also installs most
of the additional software and drivers that are included in the disk
image. Complete the installation as follows.
1. After the terminal reboots, it will perform a disk check and then
continue with the Windows 2000 installation.
2. Enter the User Name and Organization.
3. Enter the Computer Name for the client.
4. Enter the Administrator's Account Password (optional)
5. When prompted, press Finish to reboot the client.
6. Login when prompted.
Chapter 4: Operating System Recovery 4-5