Completing The Os Installation (Winxpe); Completing The Os Installation (Winnt) - NCR 7454 Hardware User's Manual

4-6 Chapter 4: Operating System Recovery
7. Run the MicroTouch screen calibration from the Desktop icon.

Completing the OS Installation (WinXPe)

The system automatically reboots when the image recovery is complete
and starts the software installation. This installation also installs most
of the additional software and drivers that are included in the disk
image. Complete the installation as follows.
1. Click the Admin button to login as Administrator.
2. Read the EULA (End‐User License Agreement) information in the
DOS window, then type EXIT and press Enter to close the DOS
window.
3. Start the Network Setup Wizard.
4. Select options to identify the network information for the terminal
environment.
5. Enter the Computer Description.
6. Enter the Computer Name.
7. Enter the Workgroup Name.
8. When prompted, press Finish to reboot the terminal.
9. Log in when prompted.
10. Open the Control Panel or use the TouchWare Icon on the desktop
and run the MicroTouch screen calibration.

Completing the OS Installation (WinNT)

The system automatically reboots when the image recovery is complete
and starts the software installation. This installation also installs most
of the additional software and drivers that are included in the disk
image. Complete the installation as follows.
1. After the terminal reboots, press Next at the Windows Setup screen.