Ncr 7454-3Xxx Winxpe Operating System Recovery Software (Version 02.02.00.01) - NCR 7454 Hardware User's Manual

NCR 7454-3xxx WinXPe Operating System Recovery Software
(Version 02.02.00.01)
(LPIN: D370‐0565‐0100)
Note: This product should only be used on 7454 terminals with a
Microsoft Windows XPe license.
7454‐3xxx Windows XPe Operating System Recovery Software
provides the means of restoring the operating system to the hard disk
of a 7454 POS terminal. The bootstrap program (di_intel.bsd) and disk
recovery boot image (di_intel.bid) are downloaded to the target
terminal over the network and restore the hard disk to the preinstalled
state as shipped from the factory. This enables installation of the
following software:
•
Microsoft Windows XPe w/ SP1
•
SMI Lynx EM/EM+ Video driver (6.13.10.228)
•
Intel 82559 Ethernet LAN drivers (6.01.03.0000)
•
NCRSYSM driver (3.0.4.12)
•
MicroTouch drivers (5.64)
The following drivers are not installed automatically, but can be
installed from their respective locations (Readme files exist in these
locations, as well):
•
Backpack CD‐ROM (4.0.100.1190)
•
Edgeport USB (2.20)
•
Inside Out Networks
Watchport/V Camera (2.20)
Chapter 4: Operating System Recovery 4-13
C:\Install\Drivers\CDRom
C:\Install\Drivers\USB
C:\Install\Drivers\Camera