NCR 7454 Hardware User's Manual page 146

5-8 Chapter 5: BIOS Updating Procedures
8. Enter the update command:
EMBflash [Enter]
9. Select the number for the 7454 terminal from the menu list:
1) 7454
2) 7401
3) 7452
4) 7453
5) 7455
6) 7460
7) 7451
8) 7456
1 [Enter]
A blue screen displays as the program runs, showing the program
progress, followed by a green screen, indicating a successful load.
Flash memory has been successfully programmed
The Class/Model/Serial # information is deleted using the Crisis
Recovery procedure. Use the normal BIOS update procedures, as
discussed earlier in this chapter, to restore the information.
PhoenixPhlash Status
PRESS ANY KEY TO EXIT
19502