Rs-232 Installation - NCR 7454 Hardware User's Manual

RS-232 Installation

1. Connect the Printer Interface Cable to the RS‐232 Connector on the
back or on the bottom of the printer.
2. Connect the other end of the printer cable to one of the RS‐232
(non‐powered) ports on the terminal.
3. Connect the external power supply cable to the Power Connector on
the printer.
4. Plug the external power supply AC cable into an AC outlet.
Cash Drawer Connector
Power Connector
RS-232 Connector
Chapter 2: Hardware Installation 2-7
16632a