Oscilloscope: Example Of Settings For Dl1540 - Nikon AF-S VR Zoom-Nikkor ED 70-200mm f/2.8G IF Repair Manual

Oscilloscope: Example of settings for DL1540

・"Fig.2" on Page L56-8 shows setting values for low-speed adjustment, while "Fig.4" on Page L56-9
shows those for high-speed adjustment.
・Setting T1 (min. value) and T2 (max. value) of one cycle of waveform beforehand, as shown by the below
dotted lines, facilitates the adjustment.
・ Because TIME/DIV, T1, T2, and other setting values are different between the low-speed adjustment and
high-speed adjustment, check the values by referring to "Fig.2" on Page L56-8 and "Fig.4" on Page 56-9.
Trigger Position
-4div
Trigger LEVEL
2.5V
Added page
992μs
1096μs
stopped
CH1=2V
DC 10:1
One cycle of
waveform
Ｔ
Cursor Type
ON
OFF
dT
- L56-15 AF-S VR 70-200/2.8G IF -
T1(0.96 div)
200us/div
(200us/div)
NORM:2MS/s
T2
Cursor Cursor
T2 1.48div
T1 T1&T2 T1 & T2
T1/T2 Cursor shift
INC
JAA78151-R.3584.A
T2(1.48 div)
TIME/DIV
div display
May 17 2007