Before Disassembling, Disassembling And Adjusting - Nikon AF-S VR Zoom-Nikkor ED 70-200mm f/2.8G IF Repair Manual

※BEFORE DISASSEMBLING, DISASSEMBLING AND ADJUSTING

①This lens loads the VR (Vibration Reduction) unit to perform the vibration reduction function.
To maintain the accuracy of the vibration reduction function, be sure to perform the VR adjustment by using the
VR lens adjustment equipment (J15380) when removing the VR unit and Gyro PCB.
However, the VR adjustment is not necessary when disassembling the other parts.
②The optical axis between the 1st lens group and the VR unit has been adjusted so that the optical axis would not
dislocate when the 1st group lens injects at zooming operation.
When replacing the 1st lens group or removing the VR unit, it is necessary to adjust the optical axis by using
the auto collimator and the special tool.
At the service facilities where [VR lens adjustment equipment] and [ Auto Collimator and Special Tool] are not
set up, do not repair or disassemble the product applicable to the above.
INC
JAA78151－R.3584.A