Adjustment Of Encoder Brush Position; Adjustment Of Focus Index Position - Nikon AF-S VR Zoom-Nikkor ED 70-200mm f/2.8G IF Repair Manual

ADJUSTMENT OF ENCODER BRUSH POSITION

B10
＃ 146 × 2

ADJUSTMENT OF FOCUS INDEX POSITION

Focus lock ring unit
＃ 25
Screw hole
B66
＃ 96 × 2
- L31 ･ AF-S VR 70-200/2.8G -
JAA78151-R.3584.A
① Loosen the 2 screws #146 and move the dis-
tance encoder brush B10 to make the point of
brush be positioned as shown in the left.
② Tighten the 2 screws #146 and fix them with
the Screw Lock.
① Detach the focus-lock ring unit.
② Loosen the 2 screws #96 and move the B66 to
align the hole position of the #25 index side
and the mark "∞" of B66.
③ Tighten the 2 screws #96 with the Screw Lock
④ Remove the zoom ring, the zoom fixing tube,
and the washer used in Page L30.
INC