System Configuration Diagram - Nikon AF-S VR Zoom-Nikkor ED 70-200mm f/2.8G IF Repair Manual

【System configuration diagram】
By using the DC/DC converter, 1 unit of rated voltage power supply can be energize this system fully.
The following figure shows the system using the DC/DC converter for F100. The system will be explained
hereafter on the assumption that this modification has been done.
In J15306-1 of AF-I communication box, the DC/DC converter is already built in.
DC/DC converter for F100
Power supply for the circuit in the AF-I
communication box: 5.5V
When the RS232C terminal of the personal computer
is a 9-pin type, connect it by using the 25-pin/9-pin
conversion connector. RJ does not supply this
connector. Use one in the market.
AF-S zoom lens inspection and
adjustment software (J18342)
Short-circuit No. 2 pattern
at the rear.
（ＶＣＣ）
（ＧＮＤ）
To RS232C
terminal
Personal computer:
This system does not depend on the
CPU type of personal computer.
- L47 ･ AF-S VR 70-200/2.8G -
INC
JAA78151-R.3584.A
Power supply
Oscilloscope
AF-I communication box
(J15306 or J15306-1)
AF-I communication adapter
(J15307)
AF-S lens