・Rotate the lens 90 ° in an arrow direction and
then adjust the angle difference and the gyro gain.
Notes:When adjusting the lens at 90 ° position,
adjust it by the buttons for the adjustment at 90 °
position as shown in Figure below.
・After the adjustment, click the [Rewrite] button to write the adjustment value in EEPROM in the lens.
・Then, click the [EXIT] button to evacuate from the adjustment mode.
Notes:If clicking [EXIT] button after not clicking the [Rewrite] button, the adjustment value is not stored
and the adjustment is not influenced.
・Click the [Quit] button at the Adjustment Items window to go back to the Lens Selection window.
Notes:Do not remove the lens or turn OFF the VR lens adjustment equipment until it goes back to the
Lens Selection window. The trouble that the adjustment value is not stored correctly, etc. occurs since
the communication is cut off.
- L69・AF-S VR 70-200/2.8G -
INC
JAA78151-R.3584.A
Buttons for adjustment
at 90 ° position