● Explanation of the AF-S zoom lens (New) inspection program
(1)Menu display
NIKON AF-S ZOOM LENS(NEW)INSPECTION / ADJUSTMENT PROGRAM.
1.ADJUSTMENT FOR MR DUTY.
2.ADJUSTMENT FOR FREQUENCY & CONTOROL. A.
3.READ AND REWRITING OF EEPROM DATA. B.
4.OPERATION OF MR ENCODER.
5.LENS DRIVING STOP ACCURACY.
6.LENS SERVO TIME.
7.SWITCHES AND LENS CONDITION.
8.
SELECT THE DEMANDED ARTICLE BY 〈- -〉 KEY, AND PUSH ENTER KEY. OR,SELECT
THE DEMANDED ARTICLE BY ITS NUMBER.
BORLAND C++ VERSION 3.1 COPYRIGHT(C)1992 BORLAND INTERNATIONAL.
・Menu items
The items 1 and 2 are used for adjustment.
The item 3 is used for reading and writing EEPROM DATA.
The items 4~7 are used for inspection.
・Selection of item
After selecting any item, one of the lens selection display, the focal length selection display, the voltage setting
display, the inspection start display, etc. appears. The displays are different for the items. Obey the instructions
of a personal computer.
・Operating voltage
Inspection of MR encoder operation
Inspection of lens servo stop accuracy
Inspection of lens servo time
Inspection of switches and lenses
・Initial driving
When "WAIT FOR SOME SECOND" is displayed, execute initial driving (repeat scanning five times and stop at
infinity end).
9.
C.
D.
E.
F.
G.RETURN TO THE SYSTEM.
FOR IBM PC/AT DOS/V CLONE.(486-PENTIUM3)
COPYRIGHT(C)2003-02-05 NIKON CORP.
Power supply for AF motor in lens
6. 0±0. 1V
6. 5±0. 1V
6. 5±0. 1V
6. 0±0. 1V
- L51 ・ AF-S VR 70-200/2.8G -
[J18342]
COMMUNICATE BY RS232C TERMINAL.
Power supply for AF-I
communication box
5. 5±0. 2V
INC
JAA78151-R.3584.A