Adjustment for electrical device
When the main PCB or SWM unit or MR encoder is replaced, be sure to make adjustments.
●
When the main PCB is replaced, be sure to perform "Writing of EEP-ROM Fixed Values".
●
How to adjust:
① Confirm that the electric current and voltage of the connected constant-voltage power supply are set to
set values, and turn the constant-voltage power supply ON.
② Click "Adjustment for Electrical Device" on the menu of AFSMNEW (J18342) inspection program.
(Fig. 1)
③ The screen for "Writing of EEP-ROM Fixed Values" appears. Click the appropriate item. (Fig.2)
④ Following the instructions on the screen, rotate the MF ring in the direction from "Infinity-end"
toward "Close-end" slowly by hand. (Fig.3)
Added page
Fig.1
Fig.2
Fig.3
- L56-4 AF-S VR 70-200/2.8G IF -
INC
JAA78151-R.3584.A
May 17 2007