Angle Difference Adjustment; Gyro Gain Adjustment - Nikon AF-S VR Zoom-Nikkor ED 70-200mm f/2.8G IF Repair Manual

・Angle Difference Adjustment
ＯＫ
ＮＧ
Buttons for [Gyro
Gain] Adjustment
Buttons for [Angle
Difference] Adjustment
・Gyro Gain Adjustment
Adjust the vibration width by the button for Gyro Gain Adjustment so that the length of the vibration width
becomes be less than 1/5 of the measured laser vibration width α.
α
Peak section of the minimum value of the
vibration width
Standard: Less than 1/5 of the vibration width α
Notes：The laser beam vibrates widely again after it passes
the peak section of the minimum value.
- L67・AF-S VR 70-200/2.8G -
JAA78151－R.3584.A
If there is angle difference, the laser beam source
becomes be whether if it rotates round even
performing the Gyro Gain Adjustment.
If it is possible to confirm the angle difference,
adjust it by the buttons for the angle difference
adjustment.
Notes：After operating the adjustment button,
wait for a few seconds until a vibration motion is
stabilized.
INC