Preparation For Inspection & Adjustment Of Main Pcb; Afszmnew Inspection And Adjustment Program (J18342) - Nikon AF-S VR Zoom-Nikkor ED 70-200mm f/2.8G IF Repair Manual

Preparation for Inspection & Adjustment of Main PCB
● In case of replacing the main PCB, SWM unit or MR encoder unit, be sure to make the necessary
adjustments as follows:
1. Adjustment item
・Adjustment for electrical device (MR duty adjustment, drive frequency/motor control adjustment)
2. Equipment and tools to be required
・Single output rated voltage power supply: 1 unit (6.0V 3.0A)
・Oscilloscope: 1 unit
・AF-I communication box (J15306-1): 1 unit
・AF-I communication adapter (J15307): 1 unit
● When the main PCB is replaced, be sure to perform "Writing of EEP-ROM Fixed Values".
The below hardware requirements are necessary for installing the program on a computer.
Ensure them before installation.
PC IBM PC/AT compatible
OS Windows XP Home Edition, Windows XP Professional, Windows 2000
CPU Pentium Ⅱ 266MHz ～ Pentium Ⅳ 2GHz
RAM (Memory) 32MB or more
HD 6 MB-or-more free space is necessary when installation
Monitor resolution 800×600 or more pixels
Interface Serial interface
※ USB interface cannot be used.
As long as the above requirements are met, either desktop or notebook PC is available.
Added page
Adjustment for electrical device (MR duty adjustment, drive frequency/
motor control adjustment)
Inspection of lens driving time

AFSZMNEW inspection and adjustment program (J18342)

- L56-1 AF-S VR 70-200/2.8G IF -
INC
JAA78151-R.3584.A
May 17 2007