Fault Codes Dw 70.1 - Asko 3,000 Series Training Manual

Fault codes DW 70.1

Indication
L2 flashing Too much water in the dishwasher:
Pressure sensor or float activated
If water not evacuated in 60 secs.
The drain pump will be turned on.
L5 flashing Leaking valve:
water intake detected when the valve
is deactivated. Any current program
stopped and drain pump activated.
See page 81 for fault codes that may appear in the service menu for the technician to view
Type of fault
(the consumer may see)
Action
Check drain pump (blockage in hoses),
flow meter, inlet valve, leakage, wiring
Check leak through inlet valve and
flow meter.
68