1
Wax motor opens
vanes to condensation
tube 1.1 K Ohms
To remove assembly, disconnect Molex connector from wax motor and fan motor. From inside the door
remove the two screws holding stainless assembly cover. Grasp the inner black cover and twist
counterclockwise. Remove unit from door.
4
Fan Assisted Dry Assembly
2
Motor drives 2 sided
2
fan to remove moist air
from tank
Motor 180 Ohms
5
3
Some units have
in addition, a
humidity sensor
which turns off
the fan based on
comparison of
outside & inside
humidity levels
6
29