Variant Menu Dw 70.5 - Asko 3,000 Series Training Manual

Main power switch
When the main power switch is turned on after replacing the control unit, the variant setting menu is
displayed.
Press the program button until the until the desired variant is selected.
The display shows 1 and L1 flashes. Variant 1 = Time saver
The display shows the number 2 and L2 flashes. Variant 2 = with Super rinse
The display shows the number 3 and L3 flashes. Variant 3 = with Tab
The display shows the number 4 and L4 flashes. Variant 4 = with Time program
Choose variant 4. Confirm selection by pressing Start. The machine detects the presence of a turbidity
sensor, a pressure sensor and a spray arm diverter. The program returns to the main menu.
Once the control board variant has been set, it is still possible to return to the variant menu and change it again. (useful if it has been programmed
incorrectly). To do so, turn off the main power switch. Wait at least 5 seconds, Press and hold the Program and Start buttons, turn on the main power
switch, wait a second then release the Program and Start buttons, then within 5 seconds press the Start button 3 times in quick succession. L1, L2, L3
or L4 flashes on the display depending on the previous setting. Use the Program button to select a different variant. Confirm by pressing the Start
button. Program returns to the main menu.

Variant menu DW 70.5

77