Variant Menu Dw 70.3 - Asko 3,000 Series Training Manual

Variant menu DW 70.3

When the power is switched on for the first time after replacing the control unit, the variant settings
menu is displayed.
Press the program button until the desired variant is selected:
L1 flashes:
Variant 1 = Time saver
L2 flashes:
Variant 2 = Super rinse option
L3 flashes:
Variant 3 = Tab
Confirm selection by pressing Start. The machine detects the presence of a turbidity sensor, a
pressure sensor and a sprat arm divertor.The program returns to the main menu.
Once the control board variant has been set, it is still possible to return to the variant menu and change it again. (useful if it has been
programmed incorrectly). To do so, turn off the main power switch. Wait at least 5 seconds, Press and hold the Program and Start buttons,
turn on the main power switch, wait a second then release the Program and Start buttons, then within 5 seconds press the Start button 3
times in quick succession. L1, L2, or L3 flashes on the display depending on the previous setting. Use the Program button to select a
different variant. Confirm by pressing the Start button. Program returns to the main menu.
69