Variant Menu Dw 70.1 - Asko 3,000 Series Training Manual

Main power switch
If the control is replaced the machine will automatically be in the variant setting menu when the power is
turned on. Press the program button repeatedly, the display will alternate between pan symbol (L1)
flashing, (variant 1) and the shower symbol (L4) flashing, (variant 2). Choose the variant, then confirm
this selection by pressing the start/stop button. The program will then revert automatically to the main
menu.
Once the control board variant has been set, it is still possible to return to the variant menu and change it again. (useful if it has been programmed
incorrectly). To do so, turn off the main power switch. Wait at least 5 seconds, Press and hold the Program and Start buttons, turn on the main power
switch, wait a second then release the Program and Start buttons, then within 5 seconds press the Start button 3 times in quick succession. Use the
Program button to select a different variant. Confirm by pressing the Start button. Program returns to the main menu.

Variant menu DW 70.1

Variant 2 Variant 1
65