Fault Indications - Asko D5233 Use & Care Manual

Fault indications

Display
flashes Too much water Phone service
flashes
flashes
flashes
AUT AUT
flashes
AUT AUT
To remove the fault indications from the display, turn off the main switch and then turn it
back on again.
Type of fault
in the dishwasher
Fault with water inlet
Valve leakage
Blocked drain
Clogged filter
Action
Check that the water
tap is open
Shut off the water tap
and contact service
See 'Possible causes'
in chapter Trouble
shooting
Clean the filters, see
chapter Cleaning