Access To Lower Front Components 3,000 Series - Asko 3,000 Series Training Manual

Access to lower front components 3,000 series

1
Plate slide
After removing the outer door & toe kick, move the plate slide to
the left to release the toe kick bracket
The following
components can be
accessed from the front:
Drain pump, line cord
connector block (with
radio interference
suppression filter),
turbidity sensor (not on
all models), and water
inlet valve.
2
4
Drain pump
Connector block with filter
3
Protection plate
Remove eight screws, four each
side (2 are underneath), to
release the protection plate
Turbidity Sensor
Samples the clarity of
the water, will increase
or decrease time,
Inlet valve
temperature and
number of rinses
12