Variant Menu Dw 20.2 - Asko 3,000 Series Training Manual

Variant menu DW 20.2

Although the controls for each
model may be on the front of the
machine or on the top of the
door. The main power switch is
always on the top of the door on
the far left side
Main power switch
3 Button option 5 Button option
If the control is replaced the machine will automatically be in the variant setting menu when the power is
switched on for the first time. Fill the machine with approx. 1 liter of water. Press the program button
repeatedly until the desired variant is selected (there are only 2 options. Display shows 1(variant 1
Express option, also good for 3 button control) or display shows 2(variant 2 Super rinse option). Choose
1. Confirm choice by pressing the start button. The machine will now sense the presence of the turbidity
and pressure sensors and the spray arm divider. The program then reverts back to the main menu.
Once the control board variant has been set, it is still possible to return to the variant menu and change it again. (useful if it has been programmed
incorrectly). To do so, turn off the main power switch. Wait at least 5 seconds, Press and hold the Program and Start buttons, turn on the main power
switch, wait a second then release the Program and Start buttons, then within 5 seconds press the Start button 3 times in quick succession. Use the
Program button to select a different variant. Confirm by pressing the Start button. Program returns to the main menu.
43