Variant Menu Dw 20.3 - Asko 3,000 Series Training Manual

Variant menu DW 20.3

5 Button design
Main power button
3 Button design
If the control is replaced the machine will automatically be in the variant setting menu when the power
is switched on for the first time. Fill the machine with approx. 1 liter of water. Press the program button
repeatedly until the desired variant is selected . L1 Lit: Express option and 3 button design. L2 Lit:
Super rinse option (Choose L1), Confirm choice by pressing the Start button. The machine will now
sense the presence of the turbidity and pressure sensors and the spray arm divider. The program then
reverts back to the main menu.
Once the control board variant has been set, it is still possible to return to the variant menu and change it again. (useful if it has been
programmed incorrectly). To do so, turn off the main power switch. Wait at least 5 seconds, Press and hold the Program and Start buttons, turn
on the main power switch, wait a second then release the Program and Start buttons, then within 5 seconds press the Start button 3 times in
quick succession. Use the Program button to select a different variant. Confirm by pressing the Start button. Program returns to the main menu.
47