Service Menu Dw 20.2 - Asko 3,000 Series Training Manual

Before entering the service menu
always cancel the currently selected
program first, by pressing the power
button to turn the unit on then holding
down the start/stop button for three
seconds.
Main power switch
Turn off the main switch, wait for at least 5 seconds. Keep the program and start buttons depressed and turn
on the main switch, release the program and start buttons at once. The display lights up after 5 seconds. The
most recent fault will appear in the display F1, F2, etc.
Press the program button and index through the following components: 1. Inlet valve, 2. Salt valve (not
applicable), 3. Detergent dispenser, 4. Circulation pump, 5. Heating element & circulation pump (max 167 F),
6. Fan, 7. Drain pump.

Service menu DW 20.2

44