Chapter 4
2. Enter the following
•
Destination IP Address
or host that you want to assign to a static route.
•
Subnet Mask
the network portion, and which portion is the host portion.
•
Gateway
- This is the IP address of the default gateway device that allows the
contact between the router and the network or host.
3. Select
Enabled
or
4. Click
Save.
You can also do the following operations to modify the current settings.
• Click
Delete
to delete the entry.
• Click
Enable Selected
• Click
Disable Selected
• Click
Delete Selected
4. 13. 2. System Routing Table
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
Advanced Routing
entries in use.
information.
- The Destination Network is the address of the network
- The Subnet Mask determines which portion of an IP address is
Disabled
for this entry on the
to enable all the entries.
to disable all the entries.
to delete all the entries.
>
System Routing
Status
drop-down list.
Table, and you can view all the valid route
Configure the Router
47