System Routing Table - TP-Link Archer C2 User Manual

Chapter 4
•
•
3. Select
4. Click
You can also do the following operations to modify the current settings.
• Click
• Click
• Click
• Click
• Click
information on the next screen.

4. 11. 2. System Routing Table

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
entries in use.
• Destination Network
to which the static route is assigned.
• Subnet Mask
network portion, and which portion is the host portion.
• Gateway
the Router and the network or host.
• Interface
WLAN (internal wired and wireless networks), or the WAN (Internet).
• Click
Downloaded from ManualsNet.com
Subnet Mask - The Subnet Mask determines which portion of an IP address is
the network portion, and which portion is the host portion.
Gateway - This is the IP address of the default gateway device that allows the
contact between the router and the network or host.
Enabled or Disabled for this entry on the
Save.
Delete to delete the entry.
Enable All to enable all the entries.
Disable All to disable all the entries.
Delete All to delete all the entries.
Previous to view the information on the previous screen and
Advanced Routing > System Routing
- The Destination Network is the address of the network or host
- The Subnet Mask determines which portion of an IP address is the
- This is the IP address of the gateway device that allows for contact between
- This interface tells you whether the Destination IP Address is on the LAN &
Refresh to refresh the data displayed.
search engine
Configure the Router
Status drop-down list.
Table, and you can view all the valid route
Next to view the
48