Cache Memory And Raid Controller Battery; Getting Started - IBM TotalStorage DS300 Hardware Installation And User's Manual

Hide thumbs Also See for TotalStorage DS300:
Table of Contents

Advertisement

Power supply

Cache memory and RAID controller battery

Each RAID controller contains 256 MB of cache memory. It also contains a sealed,
rechargeable lithium ion battery that maintains data in the cache for up to three
days in the event of a power failure. The service life of the battery is 36 months,
after which time the battery should be replaced. For information about replacing the
battery, see "Replacing the cache battery in the RAID controller" on page 66.

Getting started

Use the following list to prepare a storage subsystem for installation:
1. Prepare the site to meet all area, environmental, power, and site requirements.
2. Move the storage subsystem and its rack cabinet to the site.
3. Remove the storage subsystem from its shipping container and check the
4. Assemble the tools and equipment that you will need for installation. These
5. Install the storage subsystem in the rack. Rack mounting instructions and a
36
Hardware Installation and User's Guide
Each RAID controller also contains a battery to maintain cache data in the
event of a power failure. For more information, see "Cache memory and
RAID controller battery."
The DS400 storage subsystem contains two hot-swap power supplies. Each
unit is a self-contained power supply with three integral cooling fans, a
power switch, and two status LEDs.
For more information, see "Specifications" on page 4.
contents (for a list of items, see "Inventory checklist" on page 33). If any items
are missing, contact your IBM marketing representative or authorized reseller
before proceeding.
might include:
v Power cords (come with the storage subsystem)
v Screwdrivers (various sizes)
v Antistatic protection (such as a grounding wrist strap)
v Small form-factor pluggable (SFP) modules
v Fibre Channel and Ethernet interface cables and cable straps
v Rack-mounting hardware (comes with the storage subsystem)
v IBM ServeRAID Manager software to configure the storage subsystem
(comes with the storage subsystem on the IBM ServeRAID 7.20 Application
CD)
template for aligning the holes in the rails and the rack come with the storage
subsystem.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Totalstorage ds400

Table of Contents