Notices And Statements Used In This Document - IBM TotalStorage DS300 Hardware Installation And User's Manual

v IBM TotalStorage DS300 and DS400 Software Installation Guide
v Safety Information
v Rack Installation Instructions
v IBM TotalStorage DS300 Problem Determination Guide and IBM TotalStorage
v IBM TotalStorage DS300 and DS400 Hardware Maintenance Manual

Notices and statements used in this document

The caution and danger statements that appear in this document are also in the
multilingual Safety Information document, which is on the IBM Documentation CD.
Each statement is numbered for reference to the corresponding statement in the
Safety Information document.
The following notices and statements are used in this document:
v Note: These notices provide important tips, guidance, or advice.
v Important: These notices provide information or advice that might help you avoid
v Attention: These notices indicate potential damage to programs, devices, or
v Caution: These statements indicate situations that can be potentially hazardous
v Danger: These statements indicate situations that can be potentially lethal or
This document is available on the IBM Support Web site. It contains information
about installing the IBM ServeRAID
configuring a new controller.
This document is in PDF on the IBM Documentation CD. It contains translated
caution and danger statements. Each caution and danger statement that appears
in the documentation has a number that you can use to locate the corresponding
statement in your language in the Safety Information document.
This printed document contains instructions for installing the storage subsystem
in a rack.
DS400 Problem Determination Guide
The Problem Determination Guide is an interactive document that is available on
the IBM Support Web site. The guide addresses problems that you might
encounter with the DS300 or DS400 storage subsystem during and after
installation. It uses flowcharting techniques to guide you in the isolation and
correction of problems.
This document is in PDF on the IBM Support Web site. It contains information to
help you solve problems yourself, and it contains information for service
technicians.
inconvenient or problem situations.
data. An attention notice is placed just before the instruction or situation in which
damage could occur.
to you. A caution statement is placed just before the description of a potentially
hazardous procedure step or situation.
extremely hazardous to you. A danger statement is placed just before the
description of a potentially lethal or extremely hazardous procedure step or
situation.
™
Manager program, installing firmware, and
3
Chapter 1. Introduction