Ds400 Storage System Configuration Examples; Single Server, Single Storage Subsystem Configuration - IBM TotalStorage DS300 Hardware Installation And User's Manual

DS400 storage system configuration examples

This section shows basic and complex example configurations that you can use for
the Fibre Channel DS400 storage subsystem and storage network.
Note: Switch zoning should be used to isolate data paths from the host server to
the storage subsystem, especially in a heterogeneous operating-system
environment.

Single server, single storage subsystem configuration

The following illustration is an example of a single server, single storage subsystem
configuration.
Figure 20. Single server, single storage subsystem configuration (DS400)
26
Hardware Installation and User's Guide
Host system
with single host
adapter
DS400