Region And Time; Timer Setting; Osd Setting - Strong SRT 5302 User Manual

PART 1 • English
5.3.2 Subtitles preference
This menu allows you to set the preferred Subtitles Language and to switch Subtitles Type between
Normal and Hard of Hearing.
5.3.3 Tv System
This menu allows to setup different settings concerning your TV set.
Display Mode:
Aspect Ratio:
Video Output:

5.3.4 Region and Time

Here you can set your region and time zone.
Region:
GMT Usage:
GMT Offset:
Date/Time:
Time Display:

5.3.5 Timer Setting

In this menu you can set a programme timer or sleep timer.
Programme timer
Timer Number:
Timer Mode:
Timer Service:
Wake-up Channel:
Month/Date/Day:
Time:
When you leave the programme timer, a saving window appears. Use tu to select Yes in the
confirmation window and press oK to save or select No to cancel.
Duration:
Sleep Timer
You can set the receiver to power OFF in 10 min, 30 min, 60 min, 90 min and 120 min automatically.

5.3.6 oSD Setting

This menu allows you to change settings for: Subtitle Display, OSD Transparency and Load Default
OSD Setting.
Subtitle Display:
PAL/NTSC/AUTO
Use this menu to configure the screen aspect. Possible settings are: 4:3PS
(Pan&Scan), 4:3LB (Letter Box), 16:9 (Wide Screen) and AUTO.
Use this menu to switch the video output mode between RGB and CVBS.
This menu is used for changing the region setting.
This setting allows you to switch the usage of GMT time on or off. The
options are: Off/User Define/By Region
This menu is valid only when User Define is selected in GMT Usage menu.
The GMT offset range is -11:30 ~ +12:00, increasing by half hours
progressively.
The Date and Time menus are valid only when Off is selected in GMT Usage
menu. Press OK followed by numbers to change the date and time.
This menu allows to control whether the time is displayed on screen or not.
The options are: Off/On.
You can set up to 8 timers
Off/Once/Daily/Weekly/Monthly
TV Service/Radio Service
You can select any channel as wake-up channel.
Use pq to select the start month, date and day.
Press oK to input the time with the numeric buttons.
Press oK to input the timer duration with the numeric buttons.
To set the subtitle to Standard or OFF.
9