Local Time Setting; Timer Setting - Strong SRT 8202 User Manual

Aspect Mode:
Connection:
Digital Audio Output:
*Dolby and the double-D symbol are registered trademarks of Dolby Laboratories

7.3.3 Local Time Setting

Here you can set up your region and time zone.
Region:
GMT Usage:
GMT Offset:
Daylight Saving:
Date:
Time:
Time Display

7.3.4 Timer Setting

This menu allows you to set up to 8 timed events for recording or waking up the receiver.
Use pq to select Timer Setting from the System Setup menu and press ok to enter.
The receiver will display a list with 8 timers, followed by their respective status. Select the timer you
wish to set or change with pq and press ok to proceed.
The timer setup menu will now be displayed.
The following settings are available:
Timer Mode:
Timer Service:
Wakeup Channel:
16
Use this option to select the aspect ratio of your TV and the preferred
conversion method. The options are: Auto (automatic detection of aspect
ratio), 4:3 PS (Displays 16:9 widescreen broadcasts full screen on your 4:3 TV),
4:3 LB (black bars on top and under the picture on a 4:3 TV) and 16:9 (use this
setting for 16:9 TV sets).
Use this option to select the connection to your TV set. Select HDMI or TV
SCART. If connection type HDMI is selected, then only the CVBS signal is
available on the TV SCART.
Toggles between PCM and BIT Stream output. When PCM is selected, all
digital audio will be converted to (analogue) stereo audio. BIT Stream enables
you to listen or transfer Dolby® Digital/ Dolby® Digital Plus* audio to the TV
via HDMI or to a Home entertainment system (for example) through coaxial
S/PDIF.
Use tu to select the region you live in.
Set to By Region for broadcaster defined time, User Define to select manual a
GMT zone or to Off to input time and date manually.
Allows you to adjust your time zone. This option is only available when
GMT Usage is set to User Define.The GMT Offset range is "-11:30 ~ +12:00",
increasing by half hours progressively. The cities matching the set GMT Offset
are displayed at the bottom of the screen.
Select Off or On to add one hour for summer time.
Date and Time settings are available only when GMT Usage is set to Off. Use
the 0~9 buttons to enter the date. Press EXIT to proceed.
Date and Time settings are available only when GMT Usage is set to Off. Use
the 0~9 buttons to enter the time. Press EXIT to proceed.
Select On to display time on screen, Off to remove.
Choose between Off the timer is inactive, Once, Daily (the timer will be
executed every day, same time) or Weekly (the timer will be executed every
week, same day, same time) and Monthly (the timer will be executed every
month, same day, same time).
Choose between Channel (the timer will wake up the receiver) or Record
(Timer will start recording the scheduled event).
Use tu to select the channel the timer will wake up with.