Timer Recording; Timeshift; Playback Recorded Program - Strong SRT 5428S User Manual

6.9.3 Timer recording

You can set a manual timer recording to
record at specific time.
Press the EPG key and the press the INFO
key. This will display the Schedule window. In
this menu select the parameters of the time
frame to be recorded.
Channel No., Start Time and End Time,
Repeat and Mode

6.9.4 Timeshift

Press the REC key to start Recording first
then Press the Play key to start the timeshift
function. While timeshifting
YELLOW key to FF. or Press the GREEN key
to REW. Speeds supported are X2 X4
X8 X16 X32. Press the pause key to
pause the program during live viewing.
Press the STOP key to stop the timeshift
function, you also must press the STOP key
again to stop the Recording

6.9.5 Playback recorded program

Press DVR key to display the recorded
program. Follow the help information to
preview, playback the recorded program and
edit the recorded program.
1. Press UP/DOWN key on the remote
control to move the cursor in the
recorded program list and press OK key
to play highlighted file.
2. Press Swap key to return to upper
folder/menu;
3. Press RED key to switch between
Preview/Full screen;
4. Press GREEN key to Rename the
current file while the file is not playing.
5. Delete highlight the file then press the
Yellow key while the files is not playing.
Channel Type,
Press the
14