Input Locking - Barco FLM HD18 User Manual

Input Indication
module
INP1
HD-SDI -
SDI
INP 2
DVI equalization
When a DVI module is selected, press ENTER to go in edit mode. Use ◄ or ► to key to change the equalization value.
Default value = 13.
For non DVI-compliant transmitter, stronger equalization may be necessary even for shorter cables.
For longer cables adjust between 0 and 13 (more equalization).
For shorter cables adjust between 13 and 15 (least equalization).
8.3

Input locking

What is possible?
The output signal can be locked on an internal sync signal or on the sync signal of one of the input sources. Input locking can avoid
that some windows in the output signal are slowly moving or trembling.
When automatic is selected, the lock will be set on the input signal of the main window.
How to set up?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Input and press ENTER.
The Input menu is displayed.
3. Use the ▲ or ▼ key to select Input locking and press ENTER.
The input locking window is displayed. The actual selected locking method is indicated by an arrow.
4. Use the ▲ or ▼ key to select the desired locking and press ENTER.
Image 8-4
When:
None
Automatic
Input 1
Input 2
Input 3
Input 4
R5976986 FLM HD18 01/09/2006
Description
Input 1 selected
Input 2 selected
Image 8-5
Output is locked on an internal sync (60 Hz)
Output is locked on the selected input for the main window
Output is locked on source 1
Output is locked on source 2
Output is locked on source 3
Output is locked on source 4
Image 8-6
8. Input menu
57