Serial Communication; Baud Rate Setup - Barco FLM HD18 User Manual

Or,
enter '0' or '1' with the digit keys on the remote control or local keypad.
6. When the desired address is entered, press ENTER to store that address.
Image 13-5
Image 13-8

13.3 Serial communication

Overview
•

Baud rate setup

• Interface standard
• RS422 termination
13.3.1 Baud rate setup
What can be done?
The baudrate for a serial connection with a computer can be set up.
How to set up?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Projector control and press ENTER.
3. Use the ▲ or ▼ key to select Serial communication and press ENTER.
The serial communication menu opens.
4. Use the ▲ or ▼ key to select Baudrate and press ENTER to toggle between the available baud rates.
The following baud rates can be selected:
- 9600
- 19200
- 38400
- 57600
- 115200
5. Press EXIT to return.
R5976986 FLM HD18 01/09/2006
Image 13-6
Image 13-7
13. Projector control
123