Save Custom Settings; Refill Mode - Barco FLM HD18 User Manual

3. Use the ▲ or ▼ key to select Reset formatter and press ENTER.
The formater reset confirmation window opens.
4. Use the ▲ or ▼ key to select Yes or No and press ENTER.
If you to reset the formatter, select Yes.
If you do not want to reset the formatter, select No.
Image 14-39

14.8 Save custom settings

What is done?
The current custom settings can be saved to the internal backup device in the same way as it would be done when the projector
was switched to standby.
How to save
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Service and press ENTER.
The service window opens.
3. Use the ▲ or ▼ key to select Save custom settings and press ENTER.
The custom settings are written to the internal backup device. A message menu "Save data ..." is displayed during the save
operation.
Image 14-42

14.9 Refill mode

Before selecting Refill mode, take first all preparations necessary to refill the cooling circuit.
R5976986 FLM HD18 01/09/2006
Image 14-40
Image 14-43
Image 14-41
14. Service menu
141