Alignment Of A Table Mount Flm Projector - Barco FLM HD18 User Manual

3. Physical installation
Image 3-19
2. Gently pull the lens out of the lens holder.
Image 3-20
It's recommended to place the lens caps of the original lens packaging, back on both sides of the removed
lens to protect the lens.
It's recommended to place the foam rubber of the original projector packaging, back in the lens opening to
prevent intrusion of dust. Note that this foam rubber is packed in a plastic bag to prevent that dust, emitted
by the foam, enters the projector.
3.3

Alignment of a table mount FLM projector

How to align a table mount FLM projector ?
1. Place the projector in the desired location. Take into account the zoom range of the used lens and the size of the screen.
2. Project one of the internal hatch patterns on the screen.
3. Turn the adjustable feet in or out until the projected hatch pattern is perfectly rectangle shaped and leveled.
24 R5976986 FLM HD18 01/09/2006