Installation Of The Lamp Cover - Barco FLM HD18 User Manual
Hide thumbs
Also See for FLM HD18:
- Brochure & specs (4 pages) ,
- User manual (239 pages) ,
- Service manual (331 pages)
Table of Contents
Advertisement
17. Removal of the projector covers
Image 17-12
4. Secure the side cover by locking the captive screw in the middle at the bottom of the side cover.
Image 17-13
17.7 Installation of the lamp cover
Necessary tools
7 mm flat screw driver.
How to install the lamp cover of the projector ?
1. Install the lamp cover of the projector doing the following:
a) Bring the lamp cover towards its final position (A),
b) then gently push the locking stud at the left top corner (B) into its receiver,
c) then gently push the locking stud at the left bottom corner (C) into its receiver.
Image 17-14
2. Secure the lamp cover by locking the two captive screws at the right side of the lamp cover.
Image 17-15
160
R5976986 FLM HD18 01/09/2006
Advertisement
Table of Contents
