Barco FLM HD18 User Manual page 31

Image 3-28
4. Place all four rigging clamps in open position as illustrated.
Image 3-29
5. Place the projector (upside down) under the truss installation and lower the truss until the support bars of the truss are nearby
the rigging clamps mounted on the projector.
Image 3-30
6. Lift up the projector and hook the four rigging clamps over the support bars of the truss.
7. Lock all four rigging clamps.
8. Install a safety chain (S) around both sides of the carrying handle and around the truss.
R5976986 FLM HD18 01/09/2006
A
B
3. Physical installation
B
27