Switching Off; Using The Rcu - Barco FLM HD18 User Manual

All custom settings are written to the internal backup device. A message 'Save data ...' indicates this process.
Never switch off the projector while this message is displayed.
6.3.4

Switching off

How to switch off the projector?
1. Press first Standby.
2. Let cool down the projector until the fans decrease, at least 5 min.
3. Switch off the projector with the power switch.
C
AUTION
6.4

Using the RCU

Pointing to the reflective screen
1. Point the front of the RCU to the reflective screen surface.
Screen (B)
Image 6-4
IR control via the reflective screen
A Remote control
B Screen
C Front IR-sensor
Hardwired Remote Input
1. Plug one end of the remote cable in the connector on the bottom of the RCU.
R5976986 FLM HD18 01/09/2006
:
Never switch off the projector while the message 'Save data ... ' is displayed !
IR Sensor (C)
6. Getting started
Remote Control (A)
45