The Error logging overview menu is displayed.
For more explanation about the stored error message, see chapter "C. Troubleshooting", "Error codes", page 169.
Image 14-28
14.4 Convergence
What can be done?
The convergence patterns can be used to check the convergence alignment of red, green and blue.
Realignment of the convergence can only be done by a qualified service technician.
How to display the convergence patterns
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Service and press ENTER.
The service window opens.
3. Use the ▲ or ▼ key to select Convergence and press ENTER.
The convergence pattern is displayed. Press ENTER to toggle to another pattern. Press EXIT to return to the menu.
Image 14-31
14.5 Internal service patterns
How to select
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Service and press ENTER.
The service window opens.
3. Use the ▲ or ▼ key to select Internal service patterns and press ENTER.
The internal service pattern window opens.
R5976986 FLM HD18 01/09/2006
Image 14-29
Image 14-32
Image 14-30
14. Service menu
139