Lens Removal - Barco FLM HD18 User Manual

Image 3-17
6. Insert the lens until the connector seats into the socket.
Warning: Do not release the lens yet, as the lens may fall out of the lens holder.
7. Secure the lens in the lens holder by sliding the lens lock handle into the "locked" position, which is away from the lens power
supply socket. Ensure the lens touches the front plate of the lens holder.
Image 3-18
8. Check if the lens is really secured by trying to pull the lens out of the lens holder.
C
AUTION
before transporting the projector. Neglecting this can damage the lens holder and prism.
3.2.5

Lens removal

How to remove a lens from the projector lens holder ?
1. Support the lens with one hand while you unlock the lens holder by sliding the lock handle towards the "unlocked" position as
illustrated.
R5976986 FLM HD18 01/09/2006
:
Never transport the FLM HD18 with a lens mounted in the lens holder. Always remove the lens
3. Physical installation
23