Usb Port - Barco FLM HD18 User Manual

10/100 Base-T — RJ45 port
Pin Description
1 TXD+
2 TXD-
3 RXD+
—
4
—
5
6 RXD-
—
7
—
8

USB port

The communication interface is equipped with a master USB port, type "A" connector (H). This USB port will simplify the service
procedures for software updates or for taking backup files from the projector without network connection. An USB-stick is plugged
into the USB port and files can be transferred from or to the projector using the local or remote control unit. Note that the USB-stick
has to be Linux FAT16 compatible.
Card bus connector (PCMCIA)
This card bus connector (type II) allows you to connect your FLM projector with your LAN, using a wireless-LAN card supported by
Barco.
R5976986 FLM HD18 01/09/2006
5. Connections
39