Input Configuration - Barco FLM HD18 User Manual

8. Input menu
For more information about the available input modules and how to install, see "Input source connections", page 35.
C
AUTION
jector.
8.2.2

Input configuration

How to change?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Input and press ENTER.
The Input menu is displayed.
3. Use the ▲ or ▼ key to select Slot module type and press ENTER.
The slot overview window is displayed with the actual situation filled out.
4. Use the ▲ or ▼ key to select a slot.
Toggle with ENTER until the correct setting is displayed between the brackets (except for DVI).
Image 8-1
Possible results.
Input Indication
module
5 cable RGB HS/VS - CS
RGB CV
RGB SOG
YUV HS/VS - CS
YUV CV
YUV SOY
CVBS
S-Video
HBW RGB HS/VS - CS
Data
RGB SOG
YUV HS/VS - CS
YUV SOY
56
:
Always install a cover plate on an unused input slot. This to prevent dust intrusion into the pro-
Image 8-2
Description
RGB input with separate horizontal and vertical sync or separate composite sync.
RGB input with composite video as sync signal
RGB input with sync on green
Component video with separate horizontal and vertical sync or separate composite
sync.
Component video with composite video as sync signal
Component video with sync on Y
Composite video
Super video
RGB input with separate horizontal and vertical sync or separate composite sync.
RGB input with sync on green
Component video with separate horizontal and vertical sync or separate composite
sync.
Component video with sync on Y
Image 8-3
R5976986 FLM HD18 01/09/2006