Desktop Source Selection Menu Representing Also The Standard Input Configuration; Installed) - Barco iCon H600 Owner's Manual

6. Getting started
The available inputs slots are shown in this menu whereas the status of the sources are given by the bullet colors:
• Yellow : no signal available
• Orange : signal available
• Green : signal available and selected (displayed)
L1 RGB
L1 S-Video
L1 Video
L2 RGB
L2 S-Video
L2 Video
L3 DVI
L3 PC
Image 6-2
Desktop source selection menu representing also the standard input configuration (L1,L2,L3 input layers installed)
How to add a window to your desktop
1. Click on the Start button
The start menu is opened
2. Click on My Sources to open the menu
Image 6-3
3. Select the source you want to add to the desktop.
Source selection from the desktop will load a standard file and use AutoImage. For permanent sources it is
advised to create a custom file via the OSD menu, see Save as... in the Image file menu (Advanced chapter).
If you want to personalize i.e. rename the source(s) see "Renaming the sources" in the Desktop management
chapter.
58 R5976821 BARCO ICON 15/03/2007