8. INPUT MENU
Overview
•
Input module type
•
Input locking
8.1
Input module type
Overview
•
About Input Setup
•
Input configuration
8.1.1
About Input Setup
Overview
Each input module must be configured before these module can be used. This configuration is necessary so that the projector knows
which type of signal is connected to its input.
The projector has 4 input slots and these slots can be filled up in a random order with the available modules. Identical modules are
allowed.
For more information about the available input modules and how to install, see "Input source connections", page 35.
C
AUTION
jector.
8.1.2
Input configuration
How to change?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Input and press ENTER.
The Input menu is displayed.
3. Use the ▲ or ▼ key to select Slot module type and press ENTER.
The slot overview window is displayed with the actual situation filled out.
4. Use the ▲ or ▼ key to select a slot.
Toggle with ENTER until the correct setting is displayed between the brackets (except for DVI).
Image 8-1
R5976921 FLM R20+ PERFORMER 08/03/2006
:
Always install a cover plate on an unused input slot. This to prevent dust intrusion into the pro-
Image 8-2
Image 8-3
8. Input menu
55