Selecting Pages To Display In The Subdisplay - Sony SRW-9000 Operation Manual

Selecting Pages to Display in the
Subdisplay
Use the setup mode of the subdisplay or the
OPERATION menu of the Camera menu.
To set the subdisplay to Setup mode
Hold the PAGE button pressed for more than five
seconds to set the subdisplay to Setup mode.
Subdisplay in Setup mode
Select a page in the first line, and select ON or
OFF on the second line.
Pages that are set to OFF will not appear in the
subdisplay.
Indication Target page
SHUTTER Shutter settings page
RAMP Ramp settings page
FORMAT Video format selection page
ND/CC Optical filter status page
GAIN/WHT/ Gain setting page
5600K
GAIN L/M/H Gain switch values (L/M/H)
page
LENS FILE Lens file selection page
VTR STATUS VTR status page
TC/TAPE REM Timecode/tape remaining
page
VOLT/FAN Voltage check/Fan mode page
CHAR MIX Character data page
ASSIGN SW1/ Assignable buttons 1 and 2
SW2 setting page
ASSIGN SW3/ Assignable button 3 and
SW4 switch 4 setting page
ASSIGN SW5/ Assignable buttons 5 and 6
SW6 setting page
ASSIGN SW7/ Assignable buttons 7 and 8
SW8 setting page
ASSIGN SWN/ Assignable buttons N and C
SWC setting page
BRIGHT Subdisplay brightness
adjustment page
GAMMA TABLE Gamma table selection page
To select pages with a menu operation
Use the <SUBDISPLAY 2> page of the Camera
>USER (OPERATION) menu.
For details on how to operate the Camera menu, see
"Basic Camera Menu Operations" (page 123).
<SUBDISPLAY 2> page
Move the cursor to PAGE SELECT then press the
MENU SEL/ENTER dial to display to the
<PAGE SELECT> page.
<PAGE SELECT> page
To switch between ON/OFF settings, move the
cursor to the setting you wish to change and press
the MENU SEL/ENTER dial.
Note
"RAMP" appears only when the optional HKSR-9002 is
installed.
Basic Settings with the Subdisplay 53