Sony SRW-9000 Operation Manual page 183

Item
EDIT
POWER
Settings to reduce power
consumption
Settings
RAMP Auto When RAMP is set to "LINE", "INV", or "EVEN", sets the
Spd2 number of frames shot of the ramp start point or the number
of frames shot of the ramp end point (1FRM/FPS).
(This is the number of frames shot at the end point when the
number of frames shot of the start point was set with Auto
Spd1. Otherwise it is the number of frames shot of the start
point.)
Duration When RAMP is set to "LINE", "INV", "EVEN", or
"USER", specifies the time (seconds) from the start of the
ramp to its end.
0 to 30s (0s)
Load When RAMP is set to "USER", displays a list of files saved
Curve to a "Memory Stick".
Manu When RAMP is set to "MANU", specifies the upper or
Spd1 lower limit of the number of frames shot (1FRM/FPS).
Manu When RAMP is set to "MANU", specifies the upper or
Spd2 lower limit of the number of frames shot (1FRM/FPS).
(This is the lower limit when the upper limit was set with
Manu Spd1. Otherwise it is the upper limit.)
LED Controls the power indicator.
ON [On]: Normally light.
LOW [Low]: Slightly dim.
OFF [Off]: Disable lighting.
TALLY Controls the tally indicator.
ON [On]: Normally light.
LOW [Low]: Slightly dim.
OFF [Off]: Disable lighting.
VTR Menu List 183