Character Data On And Off; Assigning Functions To Assignable Buttons/Switch - Sony SRW-9000 Operation Manual

Character Data On and Off

You can enable and disable the superimposition
of character data onto the camera picture for
selected output destinations.
Character data page
Superimposition of character data can be turned
ON or OFF for each of the following destinations
individually.
VF
The viewfinder connected to the VF connector
(default ON)
HDY
A monitor connected to the TEST OUT or
REMOTE connector. This setting is enabled
when TEST[SIG] or RM[SIG] has been set to
HD-Y in the <MONITOR OUTPUT> page of the
Camera >USER (OPERATION) menu (default
ON).
MON
A monitor connected to the HD SDI MON1 or
HD SDI MON2 connector (default ON)
VBS
A monitor connected to the TEST OUT or
REMOTE connector (default ON)
Assigning Functions to
Assignable Buttons/Switch
You can assign functions to the following
buttons/switch: assignable buttons 1 to 3 and 5 to
8 on the right-side panel of the main unit and the
AP-1 (optional); the 4 side (top) of the assignable
4/AUTO BLK BAL switch (called "switch 4"
below) and assignable buttons N and C.
The following functions are assigned when the
unit is shipped from the factory.
Switch Function
1 OFF (no function)
2 OFF (no function)
3 OFF (no function)
4 OFF (no function)
Switch Function
5 STOP
6 PLAY
7 REW
8 F.FWD
N
OFF (no function)
C
OFF (no function)
a) ND is assigned when the optional HKSR-9004 is
installed
b) CC is assigned when the optional HKSR-9004 is
installed
Functions that can be assigned to assignable
buttons 1 to 3, 5 to 8, N, and C
Menu indication Function
REC REVIEW With REC REVIEW set to
NORM, the last part of the
recorded tape is normally
rewound for three seconds
(maximum: 10 seconds) then
played back. With REC
REVIEW set to ALL, the tape
is rewound to the recording
start position then played
back.
PB(VF/VBS) The video signals being
played back are output to the
viewfinder.
MLUT On/Off of the fixed ITU-R709
a) gamma of the viewfinder
(VFVBS)
a) On/Off of the fixed ITU-R709
MLUT(MON)
gamma of the monitor
FAN MODE Switching of the fan mode
VTR SAVE Switching of the VTR power
supply mode (SAVE, STBY)
BARS Display color bars
STOP Stop tape transport
REW Rewind the tape
PLAY Play the tape
F.FWD Fast forward the tape
GAIN Switch the gain position
WHITE BAL Switch the white balance
memory
ND Switch ND filters (when the
optional HKSR-9004 is
installed)
CC Switch CC filters (when the
optional HKSR-9004 is
installed)
Basic Settings with the Subdisplay
a)
b)
51