Interval Frame Function - Sony SRW-9000 Operation Manual

(This is the lower limit when the upper
limit was set with Manu Spd1.
Otherwise it is the upper limit.)
2
Press the HOME button to return to the
HOME screen.
3
With the FUNC button held down,
press the SELECT/ENTER dial twice.
A screen like the following appears, in which
you can check the settings.
4
With the FUNC button held down,
press the SELECT/ENTER dial.
5
Turn the ADJUST knob or the
SELECT/ENTER dial to vary the
number of frames shot.
To temporarily remove the upper and
lower limits
With the FUNC button held down, press the
SELECT/ENTER dial again.

Interval Frame Function

Even when you use a camera that does not
support the Select FPS function, you can obtain
motion effects without afterimaging by using the
Interval Frame function. You can obtain variable-
speed motion effects by changing the frame
frequency during recording (Ramp function).
This function extracts frames from video material
at a frame frequency set on this unit, stores them
in memory, and records the stored frames onto
tape.
The frame interval of shot frames is set in units of
FRM (frames).
It can be set in steps of 1FRM within the
following ranges.
For 4:2:2 formats: 1 to 64FRM
For 4:4:4 formats: 1 to 32FRM
For details on the Ramp function, see "Using the
Ramp Function" (page 110).
Interval Frame Function 113